R, Lynch & Shaft Pins

Lynch Pins are used to secure the ends of shafts where there is a higher risk of the clip falling off or vibrating loose.

The straight section of the Lynch Pin is inserted into a pre-drilled hole in a shaft, then secured using the circular section of the pin.

This Lynch Pin is zinc plated and has a pin thickness of 6mm (1/4"), and suits a maximum shaft thickness of 30mm.

Features

• Zinc Plated Steel Finish
• 6mm Pin Diameter
• Maximum 30mm Shaft Diameter

Commonly used in applications for trucks, hitch pins, towing and haulage, motor homes, utes, trailers, tray backs, camper trailers and service vehicles. Also used for mining, vehicle body manufacture, transport, marine, government and defence vehicles.

Lynch Pins are used to secure the ends of shafts where there is a higher risk of the clip falling off or vibrating loose.

The straight section of the Lynch Pin is inserted into a pre-drilled hole in a shaft, then secured using the circular section of the pin.

This Lynch Pin is zinc plated and has a pin thickness of 8mm (5/16"), and suits a maximum shaft thickness of 30mm.

Features

• Zinc Plated Steel Finish
• 8mm Pin Diameter
• Maximum 30mm Shaft Diameter

Commonly used in applications for trucks, hitch pins, towing and haulage, motor homes, utes, trailers, tray backs, camper trailers and service vehicles. Also used for mining, vehicle body manufacture, transport, marine, government and defence vehicles.

Lynch Pins are used to secure the ends of shafts where there is a higher risk of the clip falling off or vibrating loose.

The straight section of the Lynch Pin is inserted into a pre-drilled hole in a shaft, then secured using the circular section of the pin.

This Lynch Pin is zinc plated and has a pin thickness of 11mm (7/16"), and suits a maximum shaft thickness of 40mm.

Features

• Zinc Plated Steel Finish
• 11mm Pin Diameter
• Maximum 40mm Shaft Diameter

Commonly used in applications for trucks, hitch pins, towing and haulage, motor homes, utes, trailers, tray backs, camper trailers and service vehicles. Also used for mining, vehicle body manufacture, transport, marine, government and defence vehicles.

Lynch Pins are used to secure the ends of shafts where there is a higher risk of the clip falling off or vibrating loose.

The straight section of the Lynch Pin is inserted into a pre-drilled hole in a shaft, then secured using the circular section of the pin.

This Lynch Pin is a heavy duty pin, is zinc plated, has a pin thickness of 11mm (7/16"), and suits a maximum shaft thickness of 35mm.

Features

• Zinc Plated Steel Finish
• Heavy Duty
• 11mm Pin Diameter
• Maximum 35mm Shaft Diameter

Commonly used in applications for trucks, hitch pins, towing and haulage, motor homes, utes, trailers, tray backs, camper trailers and service vehicles. Also used for mining, vehicle body manufacture, transport, marine, government and defence vehicles.

Lynch Pins are used to secure the ends of shafts where there is a higher risk of the clip falling off or vibrating loose.

The straight section of the Lynch Pin is inserted into a pre-drilled hole in a shaft, then secured using the circular section of the pin.

This Lynch Pin has a larger style ring, is zinc plated, has a pin thickness of 11mm (7/16"), and suits a maximum shaft thickness of 55mm.

Features

• Zinc Plated Steel Finish
• Large Ring
• 11mm Pin Diameter
• Maximum 55mm Shaft Diameter

Commonly used in applications for trucks, hitch pins, towing and haulage, motor homes, utes, trailers, tray backs, camper trailers and service vehicles. Also used for mining, vehicle body manufacture, transport, marine, government and defence vehicles.

Lynch Pins are used to secure the ends of shafts where there is a higher risk of the clip falling off or vibrating loose.

The straight section of the Lynch Pin is inserted into a pre-drilled hole in a shaft, then secured using the circular section of the pin.

This Lynch Pin is made from grade 316 stainless steel, has a pin thickness of 4.5mm, and suits a maximum shaft thickness of 35mm.

Features

• Grade 316 Stainless Steel Finish
• Marine Grade
• 4.5mm Pin Diameter
• Maximum 35mm Shaft Diameter

Commonly used in applications for trucks, hitch pins, towing and haulage, sail fixings, boating, motor homes, utes, trailers, tray backs, camper trailers and service vehicles. Also used for mining, vehicle body manufacture, transport, marine, government and defence vehicles.

Lynch Pins are used to secure the ends of shafts where there is a higher risk of the clip falling off or vibrating loose.

The straight section of the Lynch Pin is inserted into a pre-drilled hole in a shaft, then secured using the circular section of the pin.

This Lynch Pin is made from grade 316 stainless steel, has a pin thickness of 6mm, and suits a maximum shaft thickness of 38mm.

Features

• Grade 316 Stainless Steel Finish
• Marine Grade
• 6mm Pin Diameter
• Maximum 38mm Shaft Diameter

Commonly used in applications for trucks, hitch pins, towing and haulage, sail fixings, boating, motor homes, utes, trailers, tray backs, camper trailers and service vehicles. Also used for mining, vehicle body manufacture, transport, marine, government and defence vehicles.

Lynch Pins are used to secure the ends of shafts where there is a higher risk of the clip falling off or vibrating loose.

The straight section of the Lynch Pin is inserted into a pre-drilled hole in a shaft, then secured using the circular section of the pin.

This Lynch Pin is made from grade 316 stainless steel, has a pin thickness of 7.5mm, and suits a maximum shaft thickness of 38mm.

Features

• Grade 316 Stainless Steel Finish
• Marine Grade
• 7.5mm Pin Diameter
• Maximum 38mm Shaft Diameter

Commonly used in applications for trucks, hitch pins, towing and haulage, sail fixings, boating, motor homes, utes, trailers, tray backs, camper trailers and service vehicles. Also used for mining, vehicle body manufacture, transport, marine, government and defence vehicles.

Lynch Pins are used to secure the ends of shafts where there is a higher risk of the clip falling off or vibrating loose.

The straight section of the Lynch Pin is inserted into a pre-drilled hole in a shaft, then secured using the circular section of the pin.

This Lynch Pin is made from grade 316 stainless steel, has a pin thickness of 10.5mm, and suits a maximum shaft thickness of 38mm.

Features

• Grade 316 Stainless Steel Finish
• Marine Grade
• 10.5mm Pin Diameter
• Maximum 38mm Shaft Diameter

Commonly used in applications for trucks, hitch pins, towing and haulage, sail fixings, boating, motor homes, utes, trailers, tray backs, camper trailers and service vehicles. Also used for mining, vehicle body manufacture, transport, marine, government and defence vehicles.

Shaft Lock Pins, also known as Shaft Locking Pins and Retaining D Clips, are used to secure the ends of shafts where there is a risk of the clip falling off or vibrating loose.

The Shaft Lock Pin is opened by pulling the wired section from the shaft, and is secured when the straight section of the Pin is inserted into a pre-drilled hole in a shaft, then secured using the wired section.

This Shaft Lock Pin is made from zinc plated steel, has a pin thickness of 6mm (1/4"), suits a maximum shaft thickness of 56mm and has a radius of 35mm.

Features

• Zinc Plated Steel Finish
• 6mm (1/4") Pin Diameter
• Maximum 56mm Shaft Diameter

Commonly used in applications for trucks, hitch pins, towing and haulage, motor homes, utes, trailers, tray backs, camper trailers and service vehicles. Also used for mining, vehicle body manufacture, transport, marine, government and defence vehicles.

Shaft Lock Pins, also known as Shaft Locking Pins and Retaining D Clips, are used to secure the ends of shafts where there is a risk of the clip falling off or vibrating loose.

The Shaft Lock Pin is opened by pulling the wired section from the shaft, and is secured when the straight section of the Pin is inserted into a pre-drilled hole in a shaft, then secured using the wired section.

This Shaft Lock Pin is made from zinc plated steel, has a pin thickness of 8mm (5/16"), suits a maximum shaft thickness of 56mm and has a radius of 35mm.

Features

• Zinc Plated Steel Finish
• 8mm (5/16") Pin Diameter
• Maximum 56mm Shaft Diameter

Commonly used in applications for trucks, hitch pins, towing and haulage, motor homes, utes, trailers, tray backs, camper trailers and service vehicles. Also used for mining, vehicle body manufacture, transport, marine, government and defence vehicles.

Shaft Lock Pins, also known as Shaft Locking Pins and Retaining D Clips, are used to secure the ends of shafts where there is a risk of the clip falling off or vibrating loose.

The Shaft Lock Pin is opened by pulling the wired section from the shaft, and is secured when the straight section of the Pin is inserted into a pre-drilled hole in a shaft, then secured using the wired section.

This Shaft Lock Pin is made from zinc plated steel, has a pin thickness of 10mm (3/8"), suits a maximum shaft thickness of 56mm and has a radius of 35mm.

Features

• Zinc Plated Steel Finish
• 10mm (3/8") Pin Diameter
• Maximum 56mm Shaft Diameter

Commonly used in applications for trucks, hitch pins, towing and haulage, motor homes, utes, trailers, tray backs, camper trailers and service vehicles. Also used for mining, vehicle body manufacture, transport, marine, government and defence vehicles.